Hi, is your laptop so slow that you don’t want to use it any more? My wife’s computer needs a couple of minutes to start Windows and it’s become pretty slow in general. The hardware is not that bad, so I decided to buy a solid state drive and give it a real performance boost.
– Intel’s been trying to build small gaming PCs for a while but this is one of the smallest, yet most full featured I’ve ever seen. This five liter box is a full desktop gaming PC, and one of the most easiest to upgrade computers I’ve seen in quite a while. In fact, it’s easier
To remove either of the two available external hard drives, if installed in the unit, swing open the access door at the top of the unit for the drive you would like to remove. Slide the drive locking latch down to the unlocked position. Grasp the pull loop for the hard drive bracket and pull
Hello and welcome! Today I will show you how to upgrade the processor and the memory in an Acer 5100 series laptop This is my old Acer 5101 laptop And the specifications are here. Now it’s BIOS 2.0 Old processor is a Turion of 2GHz single core processor. Before I can replace the processor with
Hey guys, Jarrod here and today we’re going to take a look at breathing some new life into a laptop that’s almost a decade old on a budget. I bought this Dell laptop for uni in early 2008, at the time it was great and had awesome specs. Now it weighs a ton and struggles
To remove a rubber foot from the bottom of the unit, peel off the foot from the unit. To install a rubber foot, press the adhesive side of the foot onto the foot pad area on the bottom of the unit. Note: only the front foot pad areas have replaceable feet. To remove the access
in this video I’m gonna show you how to install RAM on a laptop PC step. 1 do a complete power down shutdown of the PC. since we’ll be removing the battery, we want to completely shut it down. don’t do a hibernate or asleep or you might lose data. step 2 remove the battery.
Hello everyone I’m Brandon with Lenovo and I’m here today with the think pad T590. Today we are going to be replacing the keyboard. This process will take about 5 minutes and it should be easy enough for anyone to do. The tools required will be a Philips screwdriver and a nonmetallic pry tool. Before
To access components that are inside the PC, you will need to remove the access panel. To remove the access panel, first, remove the Torx head screw for the panel at the rear of the PC. Brace the bottom of the unit on the table, and firmly slide the panel forward to disengage it from
hey what’s up guys my name is Basharat welcome back to the channel if you’re new here welcome and I know I haven’t been posting for a while but we’ll talk about that in another video I apologize for that but in today’s video we’re gonna be going to update my upgrade my aunts laptop