Articles , , , , , , , , , , , , , , , , , , , , , 0 Comments

How to Replace the Speaker Assembly Before you begin: Remove the base enclosure, battery, M.2 solid state drive, WLAN module, memory modules, fans, heat sink, and system board. Make sure that the left hinge is open. Removal IMPORTANT: Make careful note of the routing of the speaker cable for later replacement. Remove the P1 Phillips-head

Read More

Articles, Blog , , , , , , , , , , , , , , , , , , , , , , , , , 5 Comments

hi everyone this is Dom from tech advisor here at CES 2020 and what I have right here is the HP elite dragonfly g2 the latest ultrabook business laptop from HP which comes with a secret twist hidden inside the chassis the most exciting thing about this laptop is not really the laptop stuff it’s

Read More

Articles, Blog , , , , , , , , , , , , , , , , , , , , , 0 Comments

How to replace the Wireless Antennas Before you begin: Remove the display stand, rear cover, motherboard shield, and fans. Removal – CAUTION! Use care when disconnecting the WLAN antenna cables from the WLAN module. A damaged cable or connector can degrade notebook performance. Carefully disconnect the MAIN WLAN antenna cable from the WLAN module by

Read More

Articles, Blog , , , , , , , , , , , , , , , , , , 100 Comments

Hello Mates! I’m here today with Notebook Review Today we are going to review HP PAVILION 15 First I want to look notebook’s design Notebook’s top cover color is blue I think its looking good HP offers blue cover against common colors on the market Under plate’s color is grey Both plates are ABS plastic

Read More

Articles, Blog , , , , , , , , , , , , , , , , , , , , , , , 1 Comment

How to replace the Hard Disk Drive Assembly Before you begin: Remove the display stand, rear cover, and motherboard shield. Removal – Disconnect the hard disk drive cable from the connector on the motherboard. Remove the hard disk drive cable from the routing channel on the chassis. Remove the four 6 mm P2 Phillips-head screws

Read More

Articles, Blog , , , , , , , , , , , , , , , , , , , , , 0 Comments

How to replace the Fans Before you begin: Remove the display stand, rear cover, and motherboard shield. Removal – Remove the three 6 mm P2 Phillips-head screws that secure the right fan to the chassis. Slide the right fan off the stand offs on the chassis and set it aside. Remove the right fan cable

Read More

Articles, Blog , , , , , , , , , , , , , , , , , , , , , , 0 Comments

How to replace the Motherboard Before you begin: Remove the display stand, rear cover, fans, motherboard shield, WLAN module, thermal module, graphics card, and CPU. Removal – IMPORTANT: Make careful note of the location of all cables connected to the motherboard for later replacement. Disconnect the following cables from the motherboard: #28 backlight cable #30

Read More

Articles, Blog , , , , , , , , , , , , , , , , , , , , , , , , 0 Comments

How to replace the Graphics Card Before you begin: Remove the display stand, rear cover, motherboard shield, and thermal module. Removal – Remove the four 5 mm P2 Phillips-head screws that secure the graphics card to the chassis and motherboard. Carefully lift the graphics card straight up and off to disconnect it from the motherboard

Read More

Articles, Blog , , , , , , , , , , , , , , , , , , , 55 Comments

How to Unlock OSD on a monitor Menu [Solved] किसी भी मॉनिटर का OSD Unlock 🔓 करे आसानी से ✔

Articles, Blog , , , , , , , , , , , , , , , , , , , , , 0 Comments

How to replace the Real-Time Clock (RTC) Battery Before you begin: Remove the display stand, rear cover, and motherboard shield. Removal – Carefully release the RTC battery from the socket retention clips that secure it on the motherboard and remove. Replacement – Carefully insert the RTC battery into the socket on the motherboard and secure

Read More