Articles, Blog , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , 0 Comments

Articles, Blog , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , 46 Comments

4 piece cardboard glue & Aluminium foil cooking paper (wax paper) I used 7w led bulb You can use any bulb you want

Articles, Blog , , , , , , , , , , , , , , , , , , , , , , , , , , , 4 Comments

We have 10 minutes! – Yeah, we have the time to do that, we just gotta go quick. – Can I keep it? You broke it! – We can tape it down. Watch, just throw some glue down there. – This is not gonna go well and I already know. What’s up, I’m Isaiah Russell-Bailey.

Read More

Articles, Blog , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , 100 Comments

Rhodes 88 MkII keys Hacking off a section. The hammers & dampers. Reframing the keybed. Removing old felt. Adding new key felt. Reassembly Some rough black walnut. Cutting to dimension. Planing to final thickness. Cutting side & back panels. Ripping the front panel. Setting tablesaw to 45° Beveling all panels to create miter butt joint.

Read More

Articles, Blog , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , 100 Comments

How’s it going everyone? today, I’m going to show you the process which I took to create this raspberry Pi laptop, so let’s get started. First I’m going to mark all the plates that will be cutting on to this thin plywood Next I will proceed to cut the plywood with the saw making sure

Read More

Articles, Blog , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , 100 Comments

A set of chromatic saucer bells. These came from an old reed organ. Washing off the dust and dirt. Rinsing off the soap. Scrubbing with Brasso to bring out the shine. Threaded rod, cut to length. Thick felt, width is circumference of the threaded rod. Spray adhesive. Covering threaded rod with fabric. Securing and tapering

Read More

Articles, Blog , , , , , , , , , , , , , , , , , , 100 Comments

take a 12 volt cpu/pc fan take a 12 volt plug or connector and solder wires to it now take a on/off switch and solder wires to it now connector on wires of 12 colt plug to one the wire of on/off switch as shown in the video now apply some hot glue to the

Read More

Articles, Blog , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , 100 Comments

hi I’m Mike Thompson. I needed an external monitor to enhance my video making experience. an external monitor helps me adjust focus and check framing when I’m not near the camera, and let’s face it, the little 3-inch LCD screen on the back of the camera isn’t all that good, plus if I put the

Read More

Articles, Blog , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , 100 Comments