How To Replace the Speaker Assembly | HP ENVY 17 Laptop PC series | HP

Articles , , , , , , , , , , , , , , , , , , , , , 0 Comments


How to Replace the Speaker Assembly Before you begin: Remove the base enclosure, battery, M.2 solid state drive, WLAN module, memory modules, fans, heat sink, and system board. Make sure that the left hinge is open. Removal IMPORTANT: Make careful note of the routing of the speaker cable for later replacement. Remove the P1 Phillips-head screw that secures the right hinge to the top cover. Open the right hinge. Pry the left speaker off of its alignment posts on the top cover. Remove the speaker cable from its routing channel along the top cover. Pry the right speaker off of its alignment posts on the top cover. Remove the speaker assembly. Replacement Place the right speaker onto its alignment posts on the top cover. Route the speaker cable through its routing channel along the top cover. Place the left speaker onto its alignment posts on the top cover. Close the right hinge. Replace the P1 Phillips-head screw that secures the right hinge to the top cover.

Leave a Reply

Your email address will not be published. Required fields are marked *